Understanding Error Code P0122: Causes, Symptoms, and Fixes

Error code P0122, or "Throttle Position Sensor A Circuit Low Input," occurs when the Engine Control Module (ECM) detects an abnormally low voltage signal from the throttle position sensor (TPS). This article will explore the causes, symptoms, and fixes for P0122, as well as how the iCarsoft CR MAX and CR Eagle can help diagnose and resolve this issue.

"The iCarsoft CR MAX and CR Eagle are essential diagnostic tools for resolving P0122."

1. What Does Error Code P0122 Mean?

P0122 indicates that the ECM has detected a voltage signal from the throttle position sensor (TPS) that is lower than the minimum expected value. This sensor is critical for controlling throttle operation and overall engine performance.

2. How Does the Throttle Position Sensor Work?

The TPS monitors the position of the throttle valve and sends voltage signals to the ECM. These signals help regulate fuel injection, engine timing, and other critical systems.

3. Common Causes of Error Code P0122

Several factors can trigger P0122. The most common causes include:

• Faulty throttle position sensor (TPS)
• Damaged or corroded wiring in the TPS circuit
• Loose or broken connectors
• Throttle body issues
• ECM software or hardware failure

4. Symptoms of Error Code P0122

When P0122 occurs, you may notice the following symptoms:

• Illuminated Check Engine Light
• Reduced engine performance
• Poor throttle response
• Frequent stalling or hesitation
• Increased fuel consumption

5. Diagnosing P0122 with CR MAX and CR Eagle

The iCarsoft CR MAX and CR Eagle make diagnosing P0122 simple and effective. Follow these steps:

1. Connect the diagnostic tool to your vehicle's OBD-II port.
2. Retrieve the error codes to confirm P0122.
3. Use live data monitoring to check TPS voltage signals.
4. Inspect the TPS, wiring, and connectors for damage.

6. How to Fix Error Code P0122

Once the issue is identified, take the following steps to resolve P0122:

• Replace the faulty throttle position sensor.
• Repair or replace damaged wiring or connectors in the TPS circuit.
• Clean or replace the throttle body if necessary.
• Reprogram or replace the ECM if the issue persists.

7. Preventing Error Code P0122

To avoid P0122 in the future, follow these maintenance tips:

• Regularly inspect the TPS and related wiring for damage.
• Clean the throttle body periodically.
• Use tools like the CR MAX or CR Eagle for regular diagnostics.

8. Why Use the iCarsoft CR MAX and CR Eagle?

The iCarsoft CR MAX and CR Eagle offer advanced diagnostic capabilities, including live data analysis, system scanning, and error code troubleshooting, making them invaluable for diagnosing and fixing P0122.

Advanced tools like the CR MAX and CR Eagle simplify diagnostics.

Learn More about iCarsoft Products