P071E Code Full Analysis: Meaning to Repair

The P071E code is a common fault code in automotive diagnosis, which involves the transmission mode switch circuit problem. This article will comprehensively analyze this fault code for you from multiple aspects such as the meaning, possible causes, common symptoms, triggering models, severity, diagnostic methods, repair methods, inspection difficulty, repair costs, clearing codes, preventive measures, and other precautions of the P071E code.

1. The meaning of the P071E code and the meaning of the numbers

The P071E code means "Transmission Mode Switch B Circuit Low". In this code, "P" represents the powertrain system fault code, "071" is the specific fault code number, and "E" usually indicates that this is a universal or global fault code that applies to all car manufacturers. The function of the transmission mode switch is to adjust the transmission shift timing according to the user's selected mode (such as sports, economy, winter, etc.) to achieve a more precise driving experience.

2. Possible causes of the P071E code

• The appearance of the P071E code is usually related to the transmission mode switch, circuit, connector, or control module.
• Possible causes include mechanical failure of the switch itself, shorts or breaks in the circuit, loose or corroded connectors, and control module communication failure.

3. Common symptoms of the P071E code

When the P071E code occurs, the car may exhibit some obvious symptoms. For example, the transmission may not shift as the driver chooses, resulting in a poor driving experience. In addition, a fault indicator light may light up on the dashboard to alert the driver that there is a problem with the system. In some cases, the vehicle may also experience weak acceleration, stuttering, or failure to start.

4. Which cars can trigger the P071E code?

The P071E code is a universal fault code that applies to all car manufacturers. Therefore, whether it is a luxury brand or an economy car, as long as it is equipped with a transmission mode switch, it may trigger this fault code.

5. The severity of the P071E code

The severity of the P071E code depends on its root cause. If the fault is caused by a simple circuit connection problem, then a simple repair may be enough to solve the problem. However, if the fault is caused by a control module failure or an internal problem in the transmission, then more complex repair work may be required. In severe cases, the transmission may need to be replaced, which will greatly increase the cost of repair.

6. Can I still drive if the P071E code appears?

Although the vehicle can still be started and driven after the P071E code appears, it is recommended that the driver take the vehicle to a professional repair shop for inspection and repair as soon as possible after discovering this fault code. Because the problem with the transmission may affect the performance and safety of the vehicle, if it is not handled in time, it may cause more serious failures.

7. How to diagnose the P071E code?

Diagnosing the P071E code usually requires the use of the OBD-II (On-Board Diagnostics II) diagnostic tool. This tool can communicate with the ECU (Engine Control Unit) through the vehicle's OBD-II interface and read the fault code stored in the ECU. Once the P071E code is read, the technician can perform further inspections and tests based on the description of the fault code and the relevant repair manual to determine the specific cause of the problem.

8. Common mistakes when diagnosing the P071E code

• Misjudging the root cause of the fault: hastily judging a component failure without carefully checking all possible fault points.
• Ignoring related systems: The transmission mode switch circuit may be related to other systems (such as the engine control system, body control system, etc.), and ignoring the inspection of these systems may lead to missed diagnosis.
• Using inappropriate tools: Using unprofessional or incompatible diagnostic tools may result in an inaccurate reading of fault codes or an inability to perform effective diagnosis.

9. How to fix the P071E code?

The method to fix the P071E code depends on the specific cause of the fault. Here are some possible repair solutions:

• Replace the transmission mode switch: If the switch itself is faulty, you may need to replace it with a new one.
• Repair circuit connections: Check for loose or corroded circuit connections and make necessary repairs.
• Replace the control module: If the control module is faulty, you may need to replace it with a new one.
• Program or reset the ECU: In some cases, you may need to program or reset the ECU to clear the fault code and restore the system to normal operation.

10. Difficulty of checking the P071E code

The difficulty of checking the P071E code depends on the specific cause of the fault and the complexity of the vehicle. In some cases, the fault may be relatively easy to diagnose and repair, such as a simple circuit connection problem. However, in other cases, the fault may involve complex electronic control systems and internal mechanical structures of the transmission, which makes inspection and repair work more difficult.

11. How much does it cost to repair the P071E code in the United States?

The cost of repairing the P071E code depends on a variety of factors, including the specific cause of the fault, the parts that need to be replaced, the charging standards of the repair shop, and the economic level of the area. In the United States, repair costs can range from a few hundred dollars to thousands of dollars. Therefore, it is recommended that drivers consult a professional repair shop as soon as possible after discovering the P071E code to obtain an accurate quote and repair plan.

12. How to clear the P071E code?

The OBD-II diagnostic tool is required to clear the P071E code. After repairing the fault and confirming that the system has returned to normal operation, the technician can use iCarsoft diagnostic tool to connect to the vehicle's ECU and follow a specific procedure to clear the fault code stored in the ECU. It should be noted that before clearing the fault code, you must ensure that the root cause of the fault has been repaired, otherwise the fault code may reappear.

13. How to prevent the occurrence of the P071E error code?

• Regular inspection and maintenance: Regularly inspect and maintain the vehicle, including checking circuit connections, cleaning and lubricating transmission components, etc.
• Avoid adverse driving conditions: Try to avoid driving the vehicle in extreme weather or bad road conditions to reduce the wear and failure risk of transmission components.
• Choose a regular repair shop: When repairs are needed, choose a regular repair shop and professional technicians to perform diagnosis and repair work.

14. Other precautions about the P071E code

• Do not clear the fault code at will: Do not use the OBD-II diagnostic tool to clear the fault code at will without determining the root cause of the fault. Otherwise, the fault code may reappear and may even damage the vehicle's electronic control system.
• Pay attention to safety during maintenance: When performing maintenance work, pay attention to safe operating specifications to avoid safety accidents such as electric shock and fire.
• Keep maintenance records: Keep records of each maintenance and related documents so that accurate maintenance history and reference information can be provided when needed in the future.

15. How to Choose a Diagnostic Tool?

When purchasing an OBD2 diagnostic tool, you should consider the following factors:

• Brand and quality: Choose a well-known brand and reliable quality products to ensure accuracy and reliability.
• Functional requirements: Choose an OBD2 scan tool with appropriate functions according to the vehicle model and repair needs. For example, some advanced tools may support more car models and more detailed diagnostic information.
• Budget: Choose a suitable OBD2 scan tool according to your budget. Prices vary depending on brand, function, and quality.
• User reviews: Check other users' reviews and feedback to understand the performance and ease of use of the product.

iCarsoft POR V2.0 is an advanced diagnostic scanner designed for Porsche vehicles, providing comprehensive and accurate fault diagnosis solutions for car owners and professional technicians. The device supports a variety of functions, including reading and clearing fault codes, real-time data stream monitoring, and performing various system tests, ensuring that you can quickly identify and solve vehicle problems. Whether you are a car enthusiast or a professional repair technician, iCarsoft POR V2.0 is an ideal choice for your on-board diagnostic tool. With this scanner, you will be able to better control the health of your vehicle and ensure that your car is always in the best condition.

Learn More About iCarsoft Diagnostic Tools

In summary, the P071E code is a common fault code involving the transmission mode switch circuit. After discovering this fault code, the driver should send the vehicle to a professional repair shop for inspection and repair as soon as possible. Through the correct diagnosis and repair methods, the problem represented by the P071E code can be effectively solved and the performance and safety of the vehicle can be restored.